|
|
|
|
|
|
|
Battery Chargers
> Water proof with PFC battery charger
> Pulse battery charger
> Smart Battery Charger
DC-DC Converters
> DC-DC Converter 1200W
> DC-DC Converter 1000W
> DC-DC Converter 800W
> DC-DC Converter 500W
> DC-DC Converter 400W
> DC-DC Converter 300W & less
Controllers
> Series Controllers
> Sep/Ex Controllers
> Permanent Magnet Controller
Throttles
> Hall effect pot box 0-5V with MS
> PB-6 Type 0-5K with MS
> FP-6 Type 0-5K with MS
> Hall Effect 0-5V Type
> Golf Cart Throttle with MS
> Inductive Throttle with Sensor
> Throttle Hall 0-5V Twist Grip
Motor
> Hub Motor
> Brushlless Car Motor
> DC Motor
Others
> Meters
> Connectors
> Solenoids/Contactors
> Brake
> Switches and sensors
Tel: +86 532 8377 5422
Fax: +86 532 8377 3076
Mob: +86 155 532 18782
E-mail: sales@chennic.com
Web: http://www.chennic.com
SHOW PRODUCTS

Battery Discharge Indicator with Hour Meter

Battery Discharge Indicator with Hour Meter
Inquire Now
Item : JCBIDHM
Details :


 
 
 
 
Description:
 
Combines in one instrument a solid state LED battery state-of-charge indicator and an LCD hour meter.
 
Operating Range:
Hour meter-DC9V~80V
Battery Indicator- DC 12V DC24 DC36 DC48 DC72 DC80 DC120
 
Display
Battery state-of-charge: 10-bar, tri-color LED
Hour meter: 6-digit LCD, 5mm high
 
Resolution
Hour meter: 99,999.9 hours
 
Case specifications
Round, step type bezel, maximum 4 pins, 3/16” terminals, stainless steel U-shape mounting bracket, with washers(2), springs(2) and nuts(2), slip-on connectors(4), isolated sleeves(4).
 
Panel Cutout
52mm, 2-1/16” diameter
 
Temperature
 
Operating:-40℃ to 85℃     
Storage: -50℃ to 90℃
 
Humidity:
maximum95% RH(Non condensing) at 38℃
 
Mechanical Shock:SAE J 1378, 55g
Mechanical Vibration:SAE J 1378, 20g
 
Pins—Maximum 4 pins, battery and hour meter power +&-; hour meter control & reset pins
 
Operation
 
Battery State-of-charge Indicator:
Only when battery is properly charged, is right most LED (#10) lighted.
As battery’s state-of-charge decreases, successive LED lights up, one at a time.
The first yellow LED(#3) is lighted, indicating "Energy reserve" (70% discharged).
The yellow Led (#2) flashes, indicating “Energy prewarning" (80% discharged).
The red and yellow LEDs (#1&#2) flash by turns, indicating “Empty” (90% depth of discharge).
 
 
LCD Hour Meter:
1. When connected to power for the first time, hour meter checks itself showing each digit for 1 second,
    and then shows 0.0 to be ready for work.
2. When control pin (4#) is connected to high voltage (DC9V~80V), hour meter begins to
    count hours and time sign (sandglass) flashes at 1Hz.
3. When control pin (4#) is disconnected, hour meter stops counting hours, and shows
    memorized hours.
4. When reset pin (3#) is connected to low voltage (GND), hour meter clears memorized
    hours to begin with new counting.
    When hour meter is completely powered off, memorized hours are kept in EEPROM
    and will be shown next time when it’s powered on.
 
Type Table
Type
Work Range Voltage
JCBDIHM-12
36V
JCBDIHM-24
48V
JCBDIHM-36
60V
JCBDIHM-48
72V
JCBDIHM-72
96V
JCBDIHM-80
144V
JCBDIHM-120
192V
Note: Working voltage can be changed with customer’s need.

Demension:

 
  • ħsf
  • ħ˽
  • ˽ħ
  • ħ˽
  • Chennic Technology Co.,Ltd.